7600 Plus Precision LCR Meter
USES:
· Production Testing of LCR
PRELIMINARY
Components The 7600 Plus LCR Meter performs precision impedance measurements over a fre-
· Frequency Response, Component quency range of 10 Hz to 2 MHz. The instrument can measure 14 different imped-
ance parameters with 0.05% accuracy, meeting today's requirements for component
& Sensor Characterization
and material testing. The ease of use and user-friendly menu programming makes
· Component Screening the 7600 Plus ideal for applications in product development, incoming inspections,
· Material Testing or production line testing.
· Quality Assurance Testing
14 Different Impedance Parameters: Measure and display any two parameters
· Measuring Dielectric Constant simultaneously to achieve coverage and flexibility not previously available.
Using Standard Test Cell
Automatic Test Sequencing: Run up to six different tests in sequence with a single
FEATURES: push of the start button. Each test can have different conditions and limits.
· Frequency Range 10 Hz to 2 MHz Swept Measurements: Fast and accurate swept parameter measurements, graphical
· 0.05% Basic Measurement or tabular, for verification of component and material response to changes in AC test
Accuracy frequency, AC test voltage, or AC test current without the need for complex pro-
gramming or an external controller.
· 7 Digit Measurement Resolution
Program and Data Storage: Test setups can be stored and recalled from either
· Programmable Test Voltage and
internal memory or from standard USB memory stick. The front panel can be
Current locked out with password protection to ensure procedures are run the same way
· Auto Ranging every time. Measured data can be stored on a USB memory stick and then trans-
ferred to PC for data reduction and analysis.
· Test Setup and Measurement Data
Storage Load Correction: Substantially improves instrument accuracy by performing
· Four-Terminal Kelvin Connections measurements on a known standard and applying correction to subsequent meas-
urements. Ideal for repetitive testing of identical devices at like test conditions.
· Standard USB Host Port, RS-232,
Handler, Parallel Printer Interfaces Automatic Calibration Procedure: The 7600 Plus can be calibrated without
returning the unit to the factory using the NIST traceable QuadTech Calibration Kit,
· Optional IEEE-488 reducing downtime and calibration costs.
· Graphical and Tabular Display of
Easy to Use: Large LCD graphics display and user friendly menu driven interface
Swept Frequency, Voltage and
allows the 7600 Plus to be put on line fast, providing useful measurements by oper-
Current Measurements ators with little or no training.
· Sequence Testing of Up To 6
Individual Tests
For more specifications, see
· Load Correction www.quadtech.com
· Binning (15)
· Built-in Auto Calibration Routine For more information
about special purchase,
rent & lease options,
call
1-800-253-1230
Fax 1-978-461-4295
Intl. 1-978-461-2100
HIPOT TESTERS · LCR METERS · MEGOHMMETERS · MILLIOHMMETERS · CABLE TESTERS
Product Specifications
7600 Plus Sweep Result: Primary parameter vs. frequency, voltage or current
Graphical or Tabular Format
Measured Parameters: Any two of 14 parameters measured and
Up to 200 measurement points per sweep
displayed simultaneously, user selectable
Basic Measurement Accuracy* Sequencing Result: Displays up to 6 sequential test results, primary and/or
Parameter Measurement Range Speed secondary
Fast Medium Slow
Cs, Cp 00000.01 fF to 9.999999 F ±0.5% ±0.25% ±0.05% AutoAcc: Automatic calculation and display of overall instrument
Ls, Lp 0000.001 nH to 99.99999 H ±0.5% ±0.25% ±0.05% accuracy for selected settings, test conditions, and
D .0000001 to 99.99999 ±0.005 ±0.0025 ±0.0005 device under test
Q .0000001 to 999999.9 ±0.005 ±0.0025 ±0.0005
Z, Rs, Rp, 000.0001 m to 99.99999 M ±0.5% ±0.25% ±0.05% Interfaces: Standard: USB Host Port, RS-232, Handler, Printer Port
ESR,Xs Optional: IEEE-488.2
Y, Gp, Bp 00000.01 µS to 9.999999 MS ±0.5% ±0.25% ±0.05%
Phase Angle -180.0000° to +179.9999° ±1.8° ±0.9° ±0.18° Charged Capacitor Protection: 8/C for Vmax < 250 V; 2/C for Vmax < 1000V
C = Capacitance in farads of the device under test
*At optimum test signal levels, frequencies, DUT values and without calibration uncertainty.
Capacitance (Cs/Cp), Inductance (Ls/Lp), Resistance (Rs/Rp), Dissipation (D) and Measurement Delay: Programmable from 0 - 1000 ms in 1 ms steps
Quality (Q) Factors, Impedance Z , Admittance Y , Phase Angle (0 Equivalent Series
-),
Resistance (ESR), Conductance (Gp), Reactance (Xs), Susceptance (Bp) Averaging: Programmable from 1 - 1000
Note: s = series, p = parallel, ESR equivalent to Rs Median value mode
Data Storage: ASCII format
Test Frequency: Range: 10 Hz to 2 MHz, continuous
Resolution: 0.1 Hz from 10 Hz to 10 kHz, Program Storage: Memory internal
USB Host Port
5 digits>10kHz
ASCII format
Accuracy: +/-(0.01% + 0.10Hz)
Calibration: Recommended Calibration Interval 1 year
Measurement Speed: Fast: 25 meas/sec Complete NIST Traceable Calibration using
Medium: 8 meas/sec QuadTech 7000-09 Cal Kit
Slow: 1 meas/sec Built-in automatic calibration procedure
Usage & Cal Data: Displays last calibration date, standard values used in
Ranging: Automatic, Range Hold or user selectable calibration and # of hours operation
Self-Test Routine: Verifies critical instrument operation at power-up
Trigger: Internal (automatic), External (RS-232, or when selected from menu
IEEE-488.2 or Handler interfaces) and Manual
Contact Check: Time to detect, 2ms
AC Test Signal: Voltage: 20 mV to 5.0 V (open circuit) Test Terminals: Front panel, four terminal (BNC) guarded
up to 500kHz in 5 mV steps
Mechanical: Bench mount with tilt bail
20 mV to 1.0 V (open circuit) Dimensions: (w x h x d): 16 x 6 x 14in
500kHz-1MHz in 5 mV steps (410 x 150 x 360mm)
20 mV to 0.5 V (open circuit) Weight: 17 lbs (8kg) net, 23 lbs (10.5kg) shipping
>1MHz in 5 mV steps Environmental: Meets MIL-T-28800E, Type 3, Class 5, Style E & F
Current: 250 µA to 100 mA (short circuit) in Operating: 0oC to + 50o C
50 µA steps Humidity: <75% for 11oC to 30oC Operating
Max. Compliance 3V < 500kHz. Storage: - 10o C to + 60o C
Power: · 90 - 250Vac · 47/63Hz
Source Impedance: 25, 400, 6.4k, or 100k, range dependent
· 100W max
DC Bias Voltage: Internal: 2.0 V
Safety: IEC61010-1: 2001
External: 0 to +/-200V
CAT 1, Pollution Degree 2
Display: LCD Graphics with back light and adjustable contrast
EMC: 89/336/EEC, 92/31/EEC, 93/68/EEC
Result Formats: Engineering or scientific notation
% Deviation from nominal of primary parameter
Deviation from nominal of primary parameter
Pass/Fail
Binning summary
No Display for maximum throughput
Ordering Information
7600 Plus Precision LCR Meter Optional Accessories:
7000-00 Rack Mount Kit 7000-06 Axial/Radial Lead Component Test
Includes: 7000-01 BNC Cable Set, 1 meter Fixture
150905 Instruction Manual 7000-02 BNC Cable Set, 2 meters 7000-07 Chip Component Test Fixture
700700 Power Cord 7000-03 Kelvin Clip Leads 7000-09 Calibration Kit
P/N N/A Calibration Certificate Traceable to 7000-04 Alligator Clip Leads
NIST 7000-05 Chip Component Tweezers
For detailed specifications, visit www.quadtech.com ·
CompuMess Elektronik GmbHpurchase, rent & lease options, call · D-85716 Unterschleißheim
For more information about special · Lise-Meitner-Str. 1
Telefon (089) 32 15 01 - 0 · ·Telefax (089) 32 15 01 - 11 · www.compumess.de · www.netzteile.de
1-800-253-1230 Fax 1-978-461-4295 · Intl. 1-978-461-2100
5 Clock Tower Place, 210 East, Maynard, MA 01754 PN030250/A1