Compact iX & i Series
Power Systems
750VA-2250VA
Programmable AC and DC
Power Source / Analyzer
Integrated System
The Compact iX Series represents a new generation of AC/DC power sources that address
the increasing demands on test equipment to perform additional functions at a lower cost.
Combination AC and DC Power By combining a flexible AC/DC power source with a high performance power analyzer, the
Source and Power Analyzer Compact iX Series is capable of handling complex applications that have traditionally required
Replace multiple instruments with a multiple systems.
single multifunction unit The sleek integrated approach of the Compact iX Series avoids cable clutter that is commonly
found in test systems. All connections are made internally and the need for digital multimeters,
Single & Three Phase Operation power harmonics analyzers, and current shunts or clamps is eliminated.
2253i/iX features a maximum output
Since many components in the Compact iX Series are shared between the AC/DC source and
of 750VA per phase the power analyzer, the total cost of the integrated system is less than the typical cost of a
750 VA to 2250 VA of Output Power multiple unit system.
Cost effective power source For less demanding applications, the Compact i Series provides similar output and transient
capabilities as the Compact iX Series, as well as basic power measurements.
Arbitrary Waveform Generation
User defined voltage waveform and Easy To Use Local Controls
distortion programming (iX Series) Both the Compact iX and i Series are microprocessor controlled and can be operated from
an easy to use front panel keypad.
Built-in Digital Power Analyzer
Analyze frequency and time domain of A large analog control knob can be used to quickly slew output parameters. This knob is
both voltage and current (iX Series) controlled by a dynamic rate change algorithm that combines the benefits of precise control
over small parameter changes, with quick sweeps through the entire range.
Rackmountable
Space-saving rackmount chassis Applications
With precise output regulation and accuracy, the Compact iX Series AC/DC sources address
Scope Capture Capability many application areas for AC and DC power testing. The Compact iX also provides a high
Built in voltage and current waveform load current capability, single and three phase output modes (2253 i/iX), and built-in power
acquisition capability (iX Series) analyzer measurements. Additional features, including line distortion simulation (LDS) and
arbitrary waveform generation, address product quality and regulatory compliance testing.
Powerful Programing Software
Powerful, yet easy to use, instrument Product Evaluation and Test
control software included (Avionics test Increasingly, manufacturers of electronic equipment and appliances are required to fully
software also available) evaluate and test their products over a wide range of input line conditions. The built-in output
transient generation and readback measurement capability offers the convenience of an easy
Constant Power Mode to use and fully integrated test system.
Provides increased current at reduced
Adding the -MODE option to the 2253 i/iX allows all three amplifier outputs to be combined
voltage to maximize efficiency on phase A output terminal. No external switching or reconnection to the load is required.
www.california-instruments.com ISO 9001:2000
Compact iX Series - Measurement and Analysis
Avionics The three phase Compact iX (2253i/iX) configuration offers independent
With an output frequency range to 1000 Hz, at up to 300 Vrms, the Compact waveform generation on each phase allowing three phase anomalies to be
iX Series is well suited for aerospace applications. Precise frequency control programmed and also allows simulation of unbalanced line conditions.
and accurate load regulation are key requirements in these applications.
Four remote control interfaces (IEEE 488, USB, LAN, & RS232) and the SCPI
command language provide for easy integration into existing ATE systems.
The Compact iX Series can eliminate the need for several additional pieces
of test equipment, and occupies a minimal amount of rack space. Options
are available for popular avionics test routines such as: DO-160, Airbus
ABD0100 and AMD24, MIL-STD-704A-F, and Boeing 7E73B-0147. Legacy
programming support is also provided for the replacement of California
Instruments' and third party AC Power Sources.
Remote Control
Standard and optional remote control interfaces allow programming of
all instrument functions from an external computer. The popular SCPI
command protocol is used for programming. Instrument drivers for popular Arbitrary Waveform Generation (Compact iX Series only)
programming environments such as National Instruments LabViewTM are Using the provided Instrument Control Software, the user also has the
available to speed up system integration. ability to define arbitrary AC waveforms. The arbitrary waveform method
of data entry provides an alternative method of specifying AC anomalies
by providing specific waveform data points. The Instrument Control
Software includes a catalog of custom waveforms.
Arbitrary waveform capability is a flexible way of simulating the effect of
real-world AC power line conditions in both engineering and production
environments.
AC/DC Transient Generation
The Compact iX and i Series controllers have a powerful AC and DC
transient generation system that allows complex sequences of voltage,
frequency and waveshapes to be generated. This further enhances
the Compact i/iX's capability to simulate AC line conditions or DC
disturbances. When combined with the multi phase arbitrary waveform
capabilities, the AC and DC output possibilities are truly exceptional. In
three phase system configurations, transient generation is controlled
Instrument Control Software independently yet time synchronized on all three phases. Accurate
Windows® Instrument Control Software is included with the Compact iX phase angle control and synchronized transient list execution provide
and i Series1 . This software provides easy access to the power source's unparalleled accuracy in positioning AC output events.
capabilities without the need to develop any custom code. The following
functions are available:
· Steady state output control (all parameters)
· Create, run, save, reload & print transient programs
· Generate & save harmonic waveforms [iX only]
· Generate & save arbitrary waveforms [iX only]
· Measure & log standard measurements
· Capture & display output voltage & current waveforms [iX only]
· Measure, display, print & log harmonic voltage & current measurements [iX only]
· Display bus traffic to & from the AC Source to help you develop your own test programs.
· Toggle between single and three phase output (2253 i/iX only).
1. Requires PC running Windows VistaTM, Windows XPTM, or Windows 2000TM. Transient programming is easily accomplished from the front panel where
clearly laid out menu's guide the user through the transient definition
Harmonic Waveform Generation process. The front panel allows for transient execution, Start, Stop, Abort
Using the latest DSP technology, the Compact iX Series controller is capable and Resume operations.
of generating harmonic waveforms to test for harmonics susceptibility of User defined transient sequences can be saved to nonvolatile memory
a unit under test. The Instrument Control Software can be used to define for instant recall and execution at a later time. The included Instrument
harmonic waveforms by specifying amplitude and phase for up to 50 Control Software supports transient definitions using a spreadsheet-like
harmonics. The waveform data points are generated and downloaded by data entry grid. A library of frequently used transient programs can be
the Instrument Control Software to the AC source through the Remote created on disk.
Interface bus and remain in nonvolatile memory. Up to 50 waveforms can
be stored and given a user defined name for easy recall.
ISO 9001:2000 www.california-instruments.com
Compact iX Series - Specifications
Input 751i/iX (1 Phase Output) 1501i/iX (1 Phase Output) 2253i/iX (1 or 3 Phase Output)
115Vrms +/- 10% or 115Vrms +/- 10% or 115Vrms - 230Vrms +/- 10% (Universal Input) - (Output
Voltage:
230Vrms +/- 10% 230Vrms +/- 10% rated1500VA@115Vinput. 115V-180Vinputderatedlinearly1500VA-2250VA)
Frequency: 47 - 63 Hz 47 - 63 Hz 47 - 63 Hz
<8.5 Arms @ 115 V <17 Arms @ 115 V <20 Arms @ 115 V
Current:
<4.4 Arms @ 230 V <8.8 Arms @ 230 V <15 Arms @ 230 V
PF: 0.97 (typical @ full load) 0.97 (typical @ full load) 0.98 (typical @ full load)
Efficiency: 80% 80% 77%
AC Output
High Range: 0 - 300Vrms 0 - 300Vrms 0 - 300Vrms
Voltage:
Low Range: 0 - 150Vrms 0 - 150Vrms 0 - 150Vrms
High Range: 3.25Arms 6.5Arms 3.25Arms (per phase)
Max. Current:
Low Range: 6.5Arms 13Arms 6.5Arms (per phase)
High Range: 10 A Peak 20 A Peak 10 A Peak (per phase)
Peak Current:
Low Range: 20 A Peak 40 A Peak 20 A Peak (per phase)
AC Power: 750VA 1500VA 750VA (per phase)
Distortion: < 1% THD < 1% THD < 1% THD
DC Output
High Range: 0 - 400Vdc 0 - 400Vdc 0 - 400Vdc
Voltage:
Low Range: 0 - 200Vdc 0 - 200Vdc 0 - 200Vdc
High Range: 1.63Adc 3.25Adc 1.63Adc (per phase)
Max. Current:
Low Range: 1.63Adc 1.63Adc 3.25Adc (per phase)
High Range: 500W 1000W 500W (per output)
Low Range: 250W 250W 500W (per output)
Voltage Accuracy/Programming Resolution (AC/DC)
Accuracy (ALC mode ON): 0.1% FS (from 5V to FS) 0.1% FS (from 5V to FS) 0.1% FS (from 5V to FS)
Programming Resolution: 0.1V 0.1V 0.1V
Frequency
Range: 16 1000Hz 16 1000Hz 16 1000Hz
0.01 Hz (16 81.91 Hz), 0.01 Hz (16 81.91 Hz), 0.01 Hz (16 81.91 Hz),
Resolution: 0.1 Hz (82.0 819.1 Hz) 0.1 Hz (82.0 819.1 Hz) 0.1 Hz (82.0 819.1 Hz)
1 Hz (820 1000 Hz) 1 Hz (8201000 Hz) 1 Hz (820 Hz 1000 Hz)
Accuracy: 0.025% 0.025% 0.025%
Measurements
Voltage Accuracy: V: 0.1% FS V: 0.1% FS V: 0.1% FS
Current Accuracy: C: 0.5% FS C: 0.5% FS C: 0.5% FS
Mechanical Specifications
Dimensions H: 3.5" (89mm), W: 19" (483mm), D: 23" (584mm) H: 5.25" (133mm), W: 19" (483mm), D: 23" (584mm)
Weight: 55 lbs (25kg) 66 lbs (30kg) 58 lbs (26kg)
Operating Temperature: 0-40°C 0-40°C 0-40°C
Interfaces
USB: Standard Standard Standard
GPIB: Option (i) Std (iX) Option (i) Std (iX) Option (i) Std (iX)
LAN: Option (iX) Option (iX) Option (iX)
RS232: N/A N/A Standard
Note: Specifications are subject to change without notice. Specifications are warranted over an ambient temperature range of 25°± 5° C. Unless otherwise noted, specifications are per phase for a sinewave with a resistive
load and apply after a 30 minute warm-up period. For three phase configurations, all specifications are for L-N. Phase angle specifications are valid under balanced load conditions only.
www.california-instruments.com ISO 9001:2000
Ordering Information Feature Comparison
Model Output Phase Max. Current per phase Input Controller: i iX
Power Output Low V range High V range Voltage
AC AC DC AC DC AC Mode x x
751i/iX 750 VA 1 6.5 1.63 3.25 1.63 115/230V DC Mode x x
1501i/iX 1.5 kVA 1 13.0 1.63 6.5 3.25 115/230V AC+DC Mode x
2253i/iX 2.25 kVA 3/1 1
6.5 3.25 3.25 1.63 115-230V Transient
1. With -MODE Option Programming x x
Arbitrary
Constant Power Chart Waveforms x
Measurements x x
100%
Current Harmonic
(RMS) 90% Measurements x
76%
Waveform
50% Acquisition x
Full
Power
20% Model:
Refer to table shown for model numbers
0% and configurations.
13% 25% 50% 76% 100%
Voltage (RMS) Supplied with:
Note: Constant power mode provides increased current at reduced voltage. Maximum available current shown. User Manual, Programming Manual,
Software (all on CD ROM)
Options
Compact 750/1501 i/iX Rear Panel -160 RTCA/DO-160D/E and EUROCAE test
firmware. Refer to -160 option data
sheet for details.
-704 Mil Std 704D/E test firmware
-704F Mil Std 704 Revision A-F test
firmware/software.
-ABD Airbus Directive 0100.1.8 tests.
-ABL ABLE Command
-AMD Airbus AMD-24C Test
-B787 Boeing 787B3-0147 tests.
-EXS External Sync Input.
-LAN Ethernet Lan Inter face (RJ45
Connector) (iX Only).
Compact 2253 i/iX Rear Panel -LF Limits maximum frequency to
500Hz.
-LKM Clock/Lock Master
-LKS Clock/Lock Auxiliary
-MODE Allows all three amplifier outputs
to be combined on phase A output
terminal. No external switching or
reconnection to the load is required
(2253 i/iX only).
-RMS Rackmount Slides (2253 Only)
-RPF Remote programming frequency
(0-10 V DC).
-RPV Remote programming voltage
(0-10 V DC).
-WHM Watt-hour measurement.
Note: Specifications are subject to change without notice. Specifications are warranted over an ambient temperature range of 25°± 5° C. Unless otherwise noted, specifications are per phase for a sinewave with a resistive
load and apply after a 30 minute warm-up period. For three phase configurations, all specifications are for L-N. Phase angle specifications are valid under balanced load conditions only.
9689 Towne Centre Drive, San Diego,GmbH · Lise-Meitner-Str. 1 · D-85716 (858) 677-0940 l sales@calinst.com
CompuMess Elektronik CA 92121-1964 l (858) 677-9040 l FAX: Unterschleißheim
© Copyright 2007, California Instruments Corp. Specifications subject to change without notice Printed in the USA CiXDS 09/07
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11 · www.compumess.de · www.netzteile.de
www.california-instruments.com