LED Power Supplies 96W
LXD96 series
LED Power
96W
LED Power Supply
Dimmable LED Power Supplies
The LXD96 series of Class 2 dimmable LED power supplies from
LED POWER Excelsys Technologies can deliver up to 96W of output power in an
extremely compact package size.
next generation power
The LXD96 series of constant current power supplies provides up to 4000mA
source of output current and 274V output voltage solutions for specific LED
requirements. With industry leading efficiencies, and an extensive protection
feature set, the LXD96 series provides high reliability and high performance in
FEATURES a compact package.
· High Efficiency (up to 92%) Model Number Output Output Input Voltage OVP Efficiency
Voltage Current Latching
· Dimming Control max
· UL1310 Class 2 LXD96-0350SW 137-274V 350mA 90-305VAC 310V 92.0%
· Active PFC (Typical 0.99) LXD96-0450SW 106-213V 450mA 90-305VAC 250V 92.0%
LXD96-0700SW 68-137V 700mA 90-305VAC 170V 91.0%
· IP67 Waterproof LXD96-1050SW 46-92V 1050mA 90-305VAC 120V 91.0%
· OVP, SCP, OTP LXD96-1400SW 35-69V 1400mA 90-305VAC 100V 90.0%
· -35 to 70°C deg operation LXD96-1750SW(H) 27-54.8V 1750mA 90-305VAC 75V 90.0%
· Universal Input 90-305VAC LXD96-2100SW(H) 22-45.7V 2100mA 90-305VAC 60V 89.0%
LXD96-2450SW(I) 19-39.1V 2450mA 90-305VAC 55V 89.0%
· UL8750 compliant LXD96-2800SW(I) 17-34.2V 2800mA 90-305VAC 50V 89.0%
· EN61347-1, -2-13 compliant LXD96-3150SW(I) 15-30.4V 3150mA 90-305VAC 45V 88.0%
LXD96-3500SW(I) 13-27.4V 3500mA 90-305VAC 40V 88.0%
LXD96-4000SW(J) 12-24V 4000mA 90-305VAC 35V 88.0%
Input Specifications
Parameter Conditions/Description Min Nom Max Units
Input Voltage Range Universal Input 90 305 VAC
Input Frequency Range 47 63 Hz
Input Current 100VAC in, 96W output 1.2 A
Leakage Current 277VAC in, 50Hz 1.0 mA
Inrush Current 230VAC in, 25°C, Cold Start 50 A
Power Factor 220VAC, 110VAC 0.96 0.99
Output Specifications
Parameter Conditions/Description Min Nom Max Units
Line Regulation ±1 %
Load Regulation ±3 %
Voltage Range See table of outputs
Output Current Accuracy % of Iout ±5 %
Ripple and Noise 20MHz Bandwidth. See Note H 3.0 % pk-pk
Overshoot 10 %
Turn-on Delay Measured at 220VAC and full load 0.6 1 s
Short Circuit Protection Auto Recovery
Over Voltage Protection Latching. See individual models OVP levels
Over Temp Protection Internal temperature 110 °C 1
General Specifications
Parameter Conditions/Description Min Nom Max Units
Isolation Voltage Input to Output See Note B 3750 VAC
Input to Chassis 1500 VAC
Efficiency See individual models 90.5 %
Safety Agency Approvals UL8750, EN61347-1, -2-13
No load Power Dissipation Measured at 230 VAC 1.0 W
MTBF MIL-HDBK-217F, 110VAC input, 80% Load, 25°C 400,000 Hours
Lifetime 45°C, 110VAC Input, 80% Load 50,000 Hours
Weight 850 g
Operating Temperature Maximum Case Temperatire Tcase =89°C -35 +70 °C
Storage Temperature -40 +85 °C
Relative Humidity Non-condensing (operating) 10 100 %RH
CompuMess Elektronik GmbH · Lise-Meitner-Str. 4 · D-85716 Unterschleißheim
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de
LED Power Supplies 96W
EMC
Parameter Standard Level Units
Emissions
Conducted EN55015 Compliant
Radiated EN55015 Compliant
LED Power
Harmonic Distortion EN61000-3-2 Compliant
Flicker and Fluctuation EN61000-3-3 Compliant
96W
Immunity
ESD EN61000-4-2 Level 4
Radiated RFI EN61000-4-3 Level 3
Fast Transients - burst EN61000-4-4 Level 4
Surge Immunity EN61000-4-5 Level 4
Conducted RFI EN61000-4-6 Compliant
Power Freq Magnetic Field EN61000-4-8 Compliant
Voltage Dips EN61000-4-11
Dimming Control
Parameter Min Nom Max Units
Control Voltage (1-10V input Voltage applied on 1-10V input wire 0 12 V
Source Current (1-10V input) Source current on 1-10V input wire 0 0.5 mA
Note A. If dimming function is not required, dimming wires are to be floating
Note B. Primary to Secondary Isolation test not to be carried on power supply.
Note C. Load Voltage must be maintained above minimum voltage. See models for voltage range.
Note D. Dimming range is 10%-100%
Note E. See graphs for Dimming control. If Dimming Signal Voltage is 0-1V, output current is 10% rated current. If Dimming Sgnal
Voltage is 9.0-10V, output current is 100% rated current
Note F. See Dimming Implementation diagrams for various dimming methods.
Note G. Do not connect GND of Dimming cable to Output.
Note H. Class 2 (USR) and Non Class 2( CNR) for dry and damp locations
Note I. Class 2 (USR and CNR) for dry and damp locations, CSA Class 2 for wet location.
Note J. Class 2 (USR and CNR) for dry and damp locations and Class 2 (USR and CNR) for wet location.
INPUT / OUTPUT WIRING
INPUT CABLE OUTPUT CABLE
SJTW 18AWG 3C SJTW 18AWG 2C
Black (L),White(N), Green (G)650±20mm Black (-V) and Red (+V) 220±20mm
DIMMING CABLE
SJTW 22AWG 2C
Purple (1-10V), Grey (GND)
MECHANICAL SPECIFICATIONS
201
174 300 ± 20
37
170
Dimming Control 10 ± 2
65 ± 5
Purple (1-10V)
67.5
Grey (GND)
50 ± 5
15±2 50±5
Output
50 ± 5 15 ± 2
650 ± 20 220 ± 20
37
188
184
5
8
50
34
4
10.5
CompuMess Elektronik GmbH · Lise-Meitner-Str. 4 · D-85716 Unterschleißheim
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de
LED Power Supplies 96W
Dimming Implementation Diagrams
LED Power
96W
Specifications are subject to change without notice
LXD96 Datasheet Pre Release 18 March 2011
CompuMess Elektronik GmbH · Lise-Meitner-Str. 4 · D-85716 Unterschleißheim
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de