Smart Choice for power
ReFlex PowerTM
Modular Programmable Precision
AC/DC/Loads Power System
Modular Programmable Precision AC/DC/Loads Power System
Xantrex Technology Inc.
ReFlex PowerTM is a high density, modular programmable power system providing DC, AC and electronic Headquarters
load assets all under control of a single controller. It provides a reconfigurable, flexible platform ideal for 8999 Nelson Way
Burnaby, British Columbia
ATE and production test environments where RFPTM can provide programmable stimulus and bias power as
Canada V5A 4B5
well as programmable loads for the device(s) under test. 800 670 0707 Toll Free
604 420 1591 Fax
The EIA 4U high RFPTM mainframe can hold up to 12 single-slot modules or combinations of single, dual
and triple slot wide modules to configure (or reconfigure) the system for the particular requirements at 5916 195th Street NE
hand. The mainframe can support up to 6 kW of output power. Arlington, Washington
USA 98223
Up to 8 mainframes, potentially up to 95 modules, can be controlled via a single controller. The controller 800 446 6180 Toll Free
communicates to the individual modules via a high speed proprietary bus protocol, providing very high data 360 925 5144 Fax
rates and a high degree of deterministic control. The RFPTM controller communicates to the host controller
via an Ethernet LAN connection designed to be compliant with the LAN Extension for Instrumentation (
TM ) standard, assuring interoperability and ease of integration.
RFPTM system modules can be combined via the controller, permitting the creation of "virtual assets" with
the voltage/current combinations required for a particular test regime. Creating "virtual assets" reduces the
"logistical tail" and total cost of ownership.
Featuring AC, DC and Load Modules
· Single slot, 330 Watt programmable DC supplies · Triple slot, 875 VA, single phase, programmable
° 16V, 20.6A AC supply
° 65V, 5.1A ° Dual range: 280V(rms), 3.5A(rms) or
140V(rms), 7A(rms)
· Dual slot, 1kW programmable DC supplies
· Triple slot, 500V, programmable electronic DC
° 33V, 30A loads
° 450V, 2.3A ° 15A, 375 Watt
° 30A, 750 Watt
www.xantrex.com
© 2007 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International.
Smart Choice for power
Applications
Rackmount ATE Systems
The high power density, large number of output channels and 16-bit resolu-
tion, all under the control of a single Ethernet controller, makes RFP ideal for
ATE system integration. The wide variety of voltage and current combinations
and power density, created by up to 12 separately programmable DC channels
in a compact 3U package, makes RFP the most compact ATE power package
on the market. Combining this with the RFP AC and load channels in the
same chassis and under the same controller, RFP can elegantly cover all of
your ATE system power stimulus requirements. ReFlex PowerTM Modular Programmable
Precision Power System
Product Development
Testing and burn-in of aircraft flight hardware, DC-DC converters and automo-
tives and semiconductor components are just a few of the items that are
being tested with RFP. From simple DC voltage set points and AC sine waves Key Features
to complex waveforms and triggers RFP keeps pace with your product devel- · Modular
opment power stimulus requirements. · Control up to 95 assets
· Control multiple AC and DC power supplies and loads
Aerospace Testing in one mainframe
Testing of flight hardware and aircraft auxiliary systems requires precision · Sag surge resistant
power stimulus hardware. RFP with its 3-phase AC capability at frequencies · Simple series and parallel operation
from DC to 5,000Hz and power to 2,625 VA with optional 1kW of 33V or 450V · Web browser control
DC all in one 3U solution is ideally designed to meet your aerospace testing · User configurable
needs. · Highest Power Density
· Simple integration
Process Control · PFC 0.95
Weather your are driving magnets for controlling ion beams for the manu- · Universal AC/DC input
facture of semiconductors or operation of an linear accelerator or driving a · Up to 6kW in one mainframe
current through electrolyte for precise control of a plating process, RFP is your · 1kW DC modules
ideal process control choice. RFP's small footprint with flexible configuration · Reduced space and logistics hassles
of multiple channels of DC, AC and load modules can solve most companies' High power density
process control power.
Handles DC and AC power and load modules
User configurable
Universal AC/DC input
Research
· Ease of integration
A research environment presents some of the most demanding requirements
Web browser control
on your test instrumentation. RFP's flexible sequencing and triggering sup-
Trigger bus
ports you research needs. All too often, equipment that meets the needs of
Configure modules to parallel or series operation
your current project does not meet the needs of your next project. RFP with
"on the fly"
its modular design protects your capital assets. The RFP architecture allows
Precision 16-bit control
you to change to different DC voltage and current combinations, add or sub-
tract AC and load modules and parallel and phase-lock modules. This allows
RFP to grow with your stimulus power needs.
Smart Choice for power
ReFlex PowerTM DC Modules
DC Modules General Specifications
Line Regulation +\- 10% line change
Steady State, Voltage 0.01% of full-scale + 10mV (330W) and 0.03% of
Mode full-scale (1kW)
Steady State, Current 0.05% of fullscale (330W) and 0.1% of full-scale
Mode (1kW)
Transient, Voltage Less than 1% of full-scale excursion returning to
Mode steady state within 500 micro-sec
Transient, Current Less than 0.05% of full-scale (330W) and less than
Mode 0.1% (1kW)
Remote Sense Up to 3V load line drop. The drop in the load leads
subtracts from the maximum voltage available for the
load.
The DC power supplies of the ReFlex PowerTM (RFPTM) system include models Parallel Up to six like modules.
rated at 330W and 1kW. They are part of a modular family of power assets Series Up to five like modules. Float not to exceed 200V
that integrate into the RFPTM Mainframe to provide a wide range of features, (16V, 33V), 300V (65V). 450V (450V).
functionality, and extensive configurability and adaptability. The modules
could be set up to operate as standalone assets, or in combinations of Sag/Surge/Hold Up Sag to 65% of nominal for 450ms at full output power
with AC input at 200VAC. Surge to 135% of nominal
parallel, series, and series/parallel groups to extend their voltage, current, for 450ms at full output with AC input 230VAC.
and power ratings. 10ms hold up at loss of input.
Remote programming 9-pin D-sub
The RFPTM system of DC power supplies brings modularity to DC power as- connector
sets, and makes possible a high degree of reconfigurability and adaptability Output connector Combination signal/power contact subminiature D
through a Mainframe-based architecture. It extends the modular configuration (Mating connector kit available)
to high power DC assets, without compromising performance or the controls
feature set. The mechanical design is ruggedized for harsh environments, Model Number LP- LPD- HP- HPD-
including mobile applications, as well as general-purpose industrial and DC16V20 C65V5.1 DC33V30 C450VA2.3
laboratory rack-mount ATE. Output Voltage 16V 65V 33V 450V
Output Current 20.6A 5.1A 30A 2.3A
Maximum Power 330W 330W 1000W 1000W
DC Modules Key Features
Mainframe Slots 1 1 2 2
· Near Linear Power Supply
· Modular Ripple / Noise
· 0.95 PFC
RMS 5mV 6mV 15mV 40mV
· Digital control loop technology
Peak-Peak 25mV 18mV 60mV 200mV
· High Power Density (3.5 watts/cubic inch)
· "Virtual Assets" by:
Programming Accuracy
Series operation
Parallel operation Voltage 0.05%+ 8mV 32.5mV 16.5mV 225mV
Combined operation with loads Current 20mA 5.1mA 30mA 2.3mA
· Simple integration
Temperature Coefficient
Voltage /°C 1.6mV 6.5mV 3.3mV 45mV
Current /°C 5mA 1mA 7.5mA 0.6mA
Output rise/fall 20msec 20msec 20msec 20msec
time
Smart Choice for power
ReFlex PowerTM AC Module
AC Modules General Specifications
Current, Maximum 140V Range 7A, not to exceed 875 VA, Overload 10A
for 0.5 Seconds
Current, Maximum 280V Range 3.5A, not to exceed 875 VA, Overload 5A
for 0.5 Seconds
Frequency 45-1200 Hz, up to 5 kHz optional
Crest Factor 4.8 X FS rms current
RMS Regulation 100% Resistive Load effect (<100 msec)
Voltage Mode 0.5% of FS
Current Mode 0.1% of FS
RMS Regulation 10% Line effect (< 100ms)
Voltage Mode 0.1% of FS
Current Mode 0.1% of FS
Programming Voltage 0.1% of FS + .02%/kHz
Accuracy Current 1% of FS
The ReFlex PowerTM (RFPTM) system includes an AC power supply rated at Frequency 0.01% of setpoint
875VA with two output voltage ranges, 0-140VAC and 0-280VAC. This AC Programming Voltage 0-140VAC 9mV, 0-280 18mV
source is part of a modular family of power assets that integrate into the Resolution Current 2.2mA
Frequency 0.1Hz thru 1kHz; 0.5Hz thru 5KHz
RFPTM Mainframe to provide a wide range of features, functionality, and
extensive configurability and adaptability. The AC module can be set up to Temperature Voltage .05% of FS per °C
coefficient Current .05% of FS per °C
operate as a standalone asset, in combinations of parallel, and in multi-phase
Distortion <1% to 500Hz
groups to extend their voltage, current, and power ratings. <2% to 2KHz
<5% to 5KHz
The module utilizes high-frequency power conversion for high efficiency to
Output DC Offset ±0.1Vdc maximum
maximize power density and realize lightweight and small size. The module is
housed in a three-width enclosure, 4.2" W x 6.75" H x 15" D, and is only 11.4 Efficiency 72%
lb. Mounting within the Mainframe is facilitated with chassis guides, back- RMS Noise 55dB below full-scale Input (via RFP Mainframe)
Inrush Current 8.8A at 115Vac; 17.6A at 230Vac
plane guide pins, and front panel captive fasteners for securing the modules. 14.6A at 270Vdc
The thermal design features integral, variable-speed fans so that the cooling
Power Factor 0.95 typical
performance scales with the complement of modules in the Mainframe, and
Hold-up time 10ms
their output loading, minimizing the audible noise and airflow requirements.
Remote Sense 0.75Vrms per line Input
Overvoltage Range: 1.4% to 110%
Protection Accuracy: 2% of setpoint
AC Modules Key Features Overcurrent Range: 0.4% to 106%
· High Power Density (2 VA/cubic inch) Protection Accuracy: 3% of setpoint
· Single or multi-phase output Auxiliary AC Output Isolated 0Vac to 31.6Vac, 2A max proportional to AC
· Parallel operation output
· 4.8 Crest factor Cooling Forced air convection, req. 40CFM airflow at
· Digital control loop technology altitude and ambient temperature
· 0.95 PFC Multi phase & parallel Up to 6 in a group
· Brown-out simulation Phase Programming 0-360 degree; counterclockwise phasor rotation is
· Up to 875 VA Range assumed, therefore the phase angle offset is lagging
the master reference.
· 45 to 5000 Hz
· Universal AC/DC input via mainframe Phase Programming 1 degree plus 1°C/kHz for balanced resistive load
Accuracy measured with respect to A-phase, at 25 degree C,
· User configurable +/- 5 degree.
· Simple integration Remote programming 9-pin D-sub
connector
Output connector Combination signal/power contact subminiature D
(Mating connector kit available)
Smart Choice for power
ReFlex PowerTM Load Modules
DC Loads Modules General Specifications
Physical Size: 3 RFP Slots
Weight 8.2 lbs (375W); 12.9 lbs (750W)
Connectors DC Input and Sense: MS3102R20-24P Remote Pro-
gramming: 9 pin D-Sub (Mating connector available)
Stability <0.1% of FS after 8 hrs
Temperature Stability <0.05% of FS/°C
Protection Overvoltage: 525V ± 3%
Overcurrent: 20A ± 3% (375W)
40A ± 3% (750W)
Overpower: 19-394W ± 5% (375W)
38 788W ± 5% (750W)
Reverse Voltage: -15V ± 3%
Parallel Operation Up to six modules. Must be adjacent.
Noise 30mA (pk-pk), 20 Hz to 20 MHz bandwidth
Programming 55ms
Response Time
The High Power Active Load (HPAL) and the Low Power Active Load (LPAL)
Input Trigger 5ms
of the ReFlex PowerTM (RFPTM) system include models rated at 375 W and Response Time
750 W. They are part of a modular family of power assets that integrate into Dynamic Response (10 50s
the RFPTM Mainframe to provide a wide range of features, functionality, and to 90/90 to 10%)
extensive configurability and adaptability. The modules could be set up to Remote Sense 0.75V per source line
operate as standalone assets, or in combinations of parallel groups to extend Max Float Voltage 500Vdc any input terminal to chassis
their current, and power ratings.
Cooling Internal fans, require 110 CFM minimum airflow at
altitude and ambient temperature
The modules utilize FET active current sinks in modular form to get the flex-
ibility of the two power ranges. The 375 W module is housed in a triple-width
Model 375W 750W
enclosure, and weighs 8.2 lb. The 750 W module is also triple-width, and
Current Mode
weighs 12.9 lb. Mounting within the Mainframe is facilitated with chassis
guides, back plane guide pins, and front panel captive fasteners for securing Range 0-15A 0-30A
the modules. The thermal design features integral, variable-speed fans so Resolution 0.9mA 1.8mA
that the cooling performance scales with the complement of modules in the Accuracy 0.3% of FS 0.3% of FS
Mainframe, and their output loading, minimizing the audible noise and the
Resistance Mode
airflow requirements.
Range 1, Resolution 1-99, 1
Range 2, Resolution 100-1000, 100
DC Electronic Load Modules Key Features Range 3, Resolution 1000-5000, 1000
· High Voltage (500V) Input Accuracy 5% of setpoint
· Digital control loop technology Analog Control
· Two models: 375W & 750W
Range 0 to 5V or 0 to 10V = FS
· Up to 750W/500V/30A
Accuracy 0.3% of FS
· Parallel up to 6 automatically
· Modular Bandwidth 8kHz @ -3dB
· High Power Density DC Input Ratings 375W 750W
· Simple integration Voltage 500V 500V
Current 15A 30A
Power 375W 750W
Measurement Min Voltage, Full Load 3V 3V
Digital Volt Meter Digital Amp Meter
Range 0-500V Range 0-15A 0-30A
Resolution 33mV Resolution 0.9mA 1.8mA
Accuracy 0.1% of FS Accuracy 0.3% of FS 0.3% of FS
Smart Choice for power
ReFlex PowerTM System Controller
Ethernet Controller General Specifications
Modules Controlled Modules in RFP Mainframe(s)
Command Language SCPI Standard 1997 command language via
downloadable IVI Drivers
Control Interface To host: Ethernet
To Module: Proprietary high speed bus protocol
Front Panel Switch Standby switch
Front Panel Connectors Interface Connector: Subminiature D - Female
LAN: Ruggedized RJ45
Input Via RFP Chassis
Hold-up time: 10ms
Physical Size: 1 RFP slot, 1.4" (35.6mm) W x 6.75"
(171.5mm) H x 15" (381 mm) D
Weight: 2.4 lbs
The ReFlex PowerTM (RFPTM) System Controller (RFPC) provides a single com-
mand and status communication port for all power assets (power supplies
and loads) within the RFPTM system. The RFPTM architecture is essentially
a distributed processor system, and the role of the RFPC is command inter-
preter and redirector, plus manager of module status messages. The unique
features of the RFPTM system of reconfigurablity and extensibility are made
possible through the use of the latest in controls technology. An FPGAbased
implementation uses VHDL, embedded processor cores for firmware based
systems control, ARCnetTM inter-module communication and LAN system
communications. The LAN network interface conforms to IEEE 802.3 stan-
dard. Network transmission rates up to 100 Mbps conforming to 10 BASE-T
and 100 BASE-TX specifications are supported.
The RFPTM Controller (RFPC) module functions under remote control through a
host controller. The RFPC module serves as a communications portal between
the power supply modules and the remote host controller. All aspects of
operation could be achieved through use of commands that comply with
the requirements of the SCPI Standard 1999 command language. Additional
discrete digital control signals are available for dedicated hardware interface.
All connectors for control are accessible on the front panel.
Smart Choice for power
ReFlex PowerTM Mainframe
RFP Key Features
· Modular
· Control up to 95 assets
· Control multiple AC and DC power supplies and loads in
one mainframe
· Create "virtual assets"
· Web browser control
· User configurable
· Highest Power Density
ReFlex PowerTM is a high density, modular programmable power system pro- · Simple integration
viding DC, AC and electronic load assets all under control of a single control- · PFC
ler. It provides a reconfigurable, flexible platform ideal for ATE and production · Universal AC/DC input
test environments where RFPTM can provide programmable stimulus and bias · Up to 6kW in one mainframe
power as well as programmable loads for the device(s) under test. · 1kW DC modules
· PFC 0.95
The EIA 4U high RFPTM mainframe can hold up to 12 single-slot modules or · Reduced space and logistics hassles
combinations of single, dual and triple slot wide modules to configure (or re- ° High power density
configure) the system for the particular requirements at hand. The mainframe ° Handles DC and AC power and load modules
can support up to 6 kW of output power. ° User configurable
° Universal AC/DC input
Up to 8 mainframes, potentially up to 95 modules, can be controlled via a · Ease of integration
single controller. The controller communicates to the individual modules via a ° Web browser control
high speed proprietary bus protocol, providing very high data rates and a high ° Trigger bus
degree of deterministic control. The RFPTM controller communicates to the ° Configure modules to parallel or series
host controller via an Ethernet LAN connection designed to be compliant with operation "on the fly"
the LAN Extension for Instrumentation ( LXITM ) standard, assuring interoper-
ability and ease of integration.
RFPTM system modules can be combined via the controller, permitting the Available power modules include
creation of "virtual assets" with the voltage/current combinations required for
a particular test regime. Creating "virtual assets" reduces the "logistical tail" · Single slot, 330 Watt programmable DC supplies
and total cost of ownership. ° 16V, 20.6A
° 65V, 5.1A
The mainframe provides internal power distribution, cabling, I/O and power
· Dual slot, 1kW programmable DC supplies
connection and rack mounting for 12-asset slots. The mainframe also supplies
° 33V, 30A
the signal and control bus fabric supporting multi-module series/parallel opera-
° 450V, 2.3A
tion, complex triggering, fault I/O and inter-mainframe control infrastructure. · Triple slot, 875 VA, single phase, programmable AC supply
° Dual range: 280V(rms), 3.5A(rms) or
140V(rms), 7A(rms)
· Triple slot, 500V, programmable electronic DC loads
° 15A, 375 Watt
° 30A, 750 Watt
Smart Choice for power
Product Specifications
Input
Universal Input AC 1 phase:115/120/200/208/230V ±10%
AC 3 phase: 115/200 or 120/208V ±10%
delta and wye
AC 3 phase: 230/400V ±10% wye neutral
AC Voltage Range: 103.5V to 253V
DC Voltage Range: 210V to 300V (314V for 2
sec.)
Power Factor: 0.95
Frequency range 47Hz to 63Hz, DC
Input Connector Amphenol, DL3102A24-10P or Phoneix style
Mating Connector Amphenol, DL3106A24-10P
Common
Module Interface Slot Positions: 12 slots Multi-module
Backplane control interface
Configuration Guidelines Up to 8 Chassis may be interconnected.
Paralleled AC, DC and Load modules must be in
adjacent slots and be like modules. AC modules
to be configured for multi-phase operation must
be in adjacent slots.
Regulatory Certified to UL 61010-1, CSA C22.2 No. 61010.1 and
IEC/EN 61010-1.
Compliance with EN61326 and FCC 21 CFR, Subpart J
CE Mark is to EMC and LVD
All specifications are subject to change
Environmental -Common
Operating Temperature -10° C to 50° C
Storage Temperature -40° C to 70 °C
Operating Humidity 95%, non-condensating
Range
Altitude up to 2,000 M
Shock and vibration Class 3 Mil-PRF-28800F
Physical
Dimensions EIA RS-310 rack mount : Wide
7" (177.8mm) (4U) : High
17"(432 mm) : Depth
Weight 11.4 lbs - Mainframe
Rack Mount RETMA brackets
Cooling Modules have integral fan cooling
Physical : Module Sizes
Dimensions Single Slot 1.4" (35.6mm) W
6.75" (171.5mm) H
15" (381 mm) D
Dimensions Dual Slot 2.8" (71.1) W
6.75" (171.5mm) H
15" (381 mm) D
Dimensions Triple Slot 4.2" (106.7mm) W
6.75" (171.5mm) H
15" (381 mm) D
CompuMess Elektronik GmbH · Lise-Meitner-Str. 1 · D-85716 Unterschleißheim
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de