Hier Klicken für das PDF Dokument!!!
IEC to screw terminal interface datasheet.
Excelsys part number XE1
Excelsys order part number : XE1
Description: IEC to Screw terminal interface
This part is an IEC to screw terminal interface that can be used as an add-on to the Xgen
series that allows the user to power the Xgen series using a screw terminal instead of the
existing IEC connector.
The connector is a press fit connector that is inserted into J2 as shown above.
Dimensional drawing below is for the screw terminal connector side only
Preliminary datasheet Page 1 of 2
Doc. 41044 Rev 00 August 10th 2007
CompuMess Elektronik GmbH · Lise-Meitner-Str. 1 · D-85716 Unterschleißheim
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de
IEC to screw terminal interface datasheet.
Excelsys part number XE1
Material
· All components used are Rohs compliant and the plastics are UL rated.
· All plastics used are of type, PC 241R-111 UL ref. QMFZ2. E207780
Screw terminal Input Connector
Pins are indented to indicate the correct connection
1. Live (L)
2. Earth Centre (Earth)
3. Neutral (N)
Max Torque to be used on screws is 1.5Nm
Notes:
1. This product is not intended for use as a stand alone unit and must be installed by
a suitably qualified person
2. The specifications contained herein are believed to be correct at time of
publication and are subject to change without notice
Preliminary datasheet Page 2 of 2
Doc. 41044 Rev 00 August 10th 2007
CompuMess Elektronik GmbH · Lise-Meitner-Str. 1 · D-85716 Unterschleißheim
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de