EFIL-100-10 Filter Module
Features:
· Input Differential and Common Mode Filter
· Water washable plastic, non-conductive case (2)
· Available with RoHS compliant construction,
simply add "(RoHS)" after the part number i.e.
EFIL-100-10 (RoHS)
Unless otherwise stated, these specications apply for ambient
temperature TA=25ºC, Vin =48VDC, 7ADC load. (1)
Input Parameters
Model EFIL-100-10 Units
Input Voltage MAX 100 VDC Mechanical tolerances unless otherwise noted:
X.XX dimensions: ±0.020 inches
Input Frequency MAX 100 Hz X.XXX dimensions: ±0.005 inches
PIN Function
1 +Vin (3)
Output Parameters
2 -Vin
Model EFIL-100-10 Units
3 Ground
Average Current,
MAX 7 ADC 4 +Vout (3)
Natural Convection
Average Current, 5 -Vout
MAX 10 ADC
400LFM Airow
Operating Current MAX 10 ADC
Insertion Loss, Differential Notes:
TYP 31 dB
Mode, 500kHz (1) All parameters measured at TC=25ºC, Vin=48VDC, 7ADC
Insertion Loss, Common Mode, load, Refer to the CALEX Application Notes for the denition
TYP 28 dB of terms, measurement circuits, and other information.
500kHz
(2) Calex Filter Modules are designed to withstand most solder/
Resistance, per leg TYP 17 millohms wash processes. Careful attention should be used when
* Absolute Maximum Ratings. Caution: Stresses in excess of the Absolute assessing the applicability in your specic manufacturing
Maximum Ratings can cause permanent damage to the device. (1) process. Filter Modules are not hermetically sealed.
(3) The unit is not Polarity Sensitive. The +Vin and +Vout pins
can be connected as -Vin and -Vout.
(4) Available with RoHS and Non-RoHS construction, contact
factory for details.
RoHS Compliance means conformity to EU Directive
General Specications 2002/95/EC of 27 January 2003, on the restriction of the use
Units of certain hazardous substances in electrical and electronic
equipment, lead, cadmium, mercury, hexavalent chromium,
Isolation
polybrominated biphenyls, and polybrominated diphenyl
Input to Ground MIN 1000 VDC ethers are not present in quantities exceeding the following
Environmental maximum concentrations in any homogeneous material,
except for applicable exemptions.
Case Temperature MIN -40 0.1% (by weight of homogeneous material) lead, mercury,
ºC
Operating Range at 10A MAX +60 hexavalent chromium, polybrominated biphenyls,
Case Temperature MIN -40 polybrominated diphenyl ethers, or 0.01% (by weight of
ºC homogeneous material) cadmium.
Operating Range at 7A MAX +80
The RoHS marking is as follows.
MIN -40
Storage Range ºC
MAX +105
General
Unit Weight TYP 28 grams
Case Dimension 1" x 2" x 0.47"
CompuMess Elektronik GmbH · Lise-Meitner-Str. 1 · D-85716 Unterschleißheim
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de
2401 Stanwell Drive, Concord Ca. 94520 Ph: 925-687-4411 Fax: 925-687-3333 www.calex.com Email: sales@calex.com
1 2/25/08