Hier Klicken für das PDF Dokument!!!

MPA320 Series
Smallest 1U 320W
Single Output
Power Factor Corrected                                                                                                                                                Only
                                                                                                                                                                   6 x 4 x 1.5
AC/DC Power Supplies                                                                                                                                                Inches!!
Key Features:                   Electrical Specifications
                                Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
· Smallest 1U 320W Supply
                                 Input
· PFC to EN61000-3-2 "A"         Parameter                                                               Conditions                          Min.       Typ.       Max.          Units
· UL, cUL, TUV Approvals                                                                                                                      90                   132
· CE Certified                   Input Voltage Range                                                                   Autoranging                                                VAC
                                                                                                                                             180                   264
· FCC Class B Emissions          Input Frequency                                                                                              47                    63             Hz
· 2 - 60 V Output Voltages                                                                                            100 - 120 VAC            8
                                 Input Current, Full Load                                                                                                                           A
· Auto Selectable AC Input                                                                                            200 - 240 VAC            4
· 700W Peak Power                                                                                                           110 VAC                                  35
                                 Inrush Current, Cold Start                                                                                                                         A
· Four Mechanical Options                                                                                                   220 VAC                                  70
                                 Leakage Current (Note 1)                                                                   240 VAC          1.5                                   mA
                                 Power Factor Correction                                                               Meets EN61000-3-2 Class A
                                 Input Protection                                                                            T8A/250V Fuse
                                 Output
                                 Parameter                                                               Conditions                    Typ.  Min.
                                                                                                                                              Max.                               Units
                                 Output Voltage Adjustment                                                               By Trim Pot   ±5.0                                       %
                                 Output Regulation (Note 2)                                                                            ±1.0                                       %
                                 Hold Time                                                                110 VAC, 80% Load             20                                       mSec
                                 Ripple & Noise (20 MHz) (Note 3)                                                See Model Selection Guide
                                 Overload Protection                                                              Power Limit   130           160                                  %
                                 Over Voltage Protection                                              >130% of Rated Output Voltage. Recycle AC Input.
                                 Over Temperature Protection
                                 Temperature Coefficient                                                                                               ±0.04                      %/ºC
                                 Transient Recovery Time (Note 4)                                                                                       2.5                       mS
                                                                                                                50% Load Change
                                 Transient Response Deviation                                                                                            5                         %
                                 Overshoot/Undershoot                                                               At Turn On/Off                                  5.0            %
                                 Turn On Delay                                                                            120 VAC                                    1             S
                                 Output Short Circuit                                                               Continuous With Autorecovery
                                 General
                                 Parameter                                                             Conditions                           Min.        Typ.       Max.          Units
                                                                                                                 Input - Output             3,000
                                 Isolation Voltage (Note 5)                                         Input - FG (Frame Ground)               1,500                                 VAC
                                                                                                                  Primary - Core            1,500
                                 Switching Frequency                                                                       Fixed                         23                       kHz
MicroPower Direct Interface Signals
292 Page Street
                                 Power Supply On                                                                                    Green LED (LED1) on the PCB
Suite D
                                                                                         PG on CN1. Goes TTL high 100 to 500 mS after regulation. Goes low at
Stoughton, MA 02072              Power Good Signal
                                                                                                     least 1 mS before the loss of regulation. Will sink 100 mA.
USA
                                                                                          FF on pin 3 of CN1. Open collector output rated for 15 VDC/5 mA sink
                                 Fan Fail
T: (781) 344-8226                                                                                        current maximum. Goes high if a fan failure is detected
F: (781) 344-8481                Environmental
E: sales@micropowerdirect.com    Parameter                                                               Conditions                Min.    Typ.   Max.                           Units
W: www.micropowerdirect.com      Operating Temperature Range                                                            Ambient      0      +25   +50                             ºC
                                 Output Derating                                                                  2.5%/ ºC from +50 ºC to + 70 ºC
                                 Storage Temperature Range                                                                          -20           +85                              ºC
                                 Cooling                                                                            See Model Selection Guide
                                 Operating Humidity                                                          RH, Non-condensing                    90                              %
                                 Reliability Specifications
                                 Parameter                                                         Conditions                Min.      Typ.    Max.        Units
                                 MTBF                                                     MIL HDBK 217F, 30ºC, Gnd Benign     100                         kHours
                                 Safety Standards                                          UL 60950; CSA C22.2 No. 60950; TUV EN60950; CB Report (IEC 60950)
                                 EEMI Compliance                                                      Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,3
                                 EMS Immunity Compliance                                                         EN6100-4-2,3,4,5,6,8,11; EN55024,; CE Marked (LVD)

                                                               CompuMess Elektronik GmbH · Lise-Meitner-Str. 1 · D-85716 Unterschleißheim
                                                               Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
Model Selection Guide
                              Output Voltage                          Max. Output Current (Notes 7, 8)                                                                       Input & Output Connector CN2:
      Model                                                                                              Ripple &                                       Efficiency           Howder Terminal Block No. HB-95-7P or
                         Factory                                  "U, E, F" Units "U" Units   "C" Units                                                                      Mating Molex Part No. 09-91-1600 (16 pin)
     Number                            Range                                                               Noise                                          (Note 7)
                         PreSet                                      22 CFM       Convection Convection
                                                                                                                                                                             Output Pin Assignment:
MPA320x-05z               5 VDC     2.0 - 5.5 VDC                      45.00A       27.28A      25.00A  50 mV p-p                                           75%
MPA320x-09z               9 VDC   6.0 - 11.0 VDC                       29.10A       16.37A      13.64A     1% p-p                                           80%                    Howder                 Molex
MPA320x-12z              12 VDC 12.0 - 13.5 VDC                        26.66A       15.00A      14.16A     1% p-p                                           83%                 Pins 1 ~ 2: V+        Pins 1 ~ 5: V+
MPA320x-15z              15 VDC 13.6 - 15.0 VDC                        21.33A       12.00A      11.33A     1% p-p                                           83%                 Pins 3 ~ 4: V-       Pins 6 ~ 10: V-
MPA320x-18z              18 VDC 16.0 - 20.0 VDC                        17.77A       10.00A       9.44A     1% p-p                                           83%                  Pin 5: Grnd          Pin 12: Grnd
MPA320x-24z              24 VDC 21.0 - 26.0 VDC                        13.33A        7.50A       7.08A     1% p-p                                           83%                 Pin 6: Neutral       Pin 14: Neutral
MPA320x-28z              28 VDC 27.0 - 34.0 VDC                        11.42A        6.42A       6.07A     1% p-p                                           83%                   Pin 7: Line          Pin 16: Line
MPA320x-36z              36 VDC 35.0 - 42.0 VDC                          8.88A       5.00A       4.72A     1% p-p                                           83%
MPA320x-48z              48 VDC 43.0 - 50.0 VDC                          6.66A       3.75A       3.54A     1% p-p                                           83%              Logic Signal Connector CN1:
MPA320x-54z              54 VDC 51.0 - 60.0 VDC                          5.92A       3.33A       3.14A     1% p-p                                           83%              Mating JST XHP or equivalent (CHYAO
                                                                                                                                                                             SHIUNN JS-21001-3) Mating Pins: JST
Notes:                                                                     6. The full output range (see table above) is covered in the safety agency certification. Stan-   SXH-002T-P0.6 for AWG 30 to 26.
1. Models are available with leakage current specified as low as 500 µA       dard models are factory set to the "Preset" voltage. This may be set to other levels within
   (at 240 VAC) / 300 µA (at 120 VAC). Contact the factory for details.       the range without affecting the agency certification. Contact the factory for details.         Fan driver connector (FAN2):
2. Output regulation includes line & load.                                 7. Output current is given for the factory preset voltage. With the exception of the "05"         12 VDC / 400 mA is available to drive
3. Ripple & noise is measured from 10 Hz to 20 MHz. Measurement               output model, the maximum continuous output power level is 320W (with 22 CFM),                 an external fan. Mating connector is
   connection to the unit is made with a 0.1 µF ceramic capacitor & a 22      180W (U-Chassis convection cooled) or 170W ("C" units convection cooled. For more
   µF electrolytic capacitor connected in parallel.                           information, contact the factory.                                                              a Molex P/N 22-01-1022 ( 2 pins 0.98
4. Transient recovery is measured to within a 1% error band for a load     8. Units will provide peak power of 700W for 500 µS. For units capable of longer durations,       pitch) or equivalent with Series 2759 or
   step change of 50% to 100%.                                                contact the factory.                                                                           5159 terminals.
5. Isolation specifications are production HI-Pot tested for 3 seconds.    9. A 1% minimum load is required to maintain regulation and ripple specifications.

Mechanical Dimensions: U-Chassis (U Suffix)                                                                    U-Chassis Cover (C Suffix)




Enclosure With End Fan (E Suffix)                                                                              Enclosure With Top Fan (F Suffix)




                              MicroPower Direct
                                                     www.micropowerdirect.com
 292 Page Street Ste D Stoughton, MA 02072                                 ·                    CompuMess Elektronik344-8481·
                                                                                  TEL: (781) 344-8226 ·   FAX: (781) GmbH                Lise-Meitner-Str. 1 · D-85716 Unterschleißheim
                                                                                                                                            ·    E-Mail: sales@micropowerdirect.com
                                                                                                     Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
                                                                                                     info@compumess.de · www.compumess.de · www.netzteile.de