MPM-15IS Series
B
Board Mount, 15W
dM t
Single, Dual & Triple Out
AC/DC Power Supplies
Key Features: Electrical Specifications
Specifications typical @ +25°C, 230 VAC input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
· 15W Output Power Input
· Universal 85-265 VAC Input Parameter Conditions Min. Typ. Max. Units
Input Voltage Range 85 265 VAC
· EN 60950 Approved Input Frequency 47 440 Hz
· Industry Standard Pin-Out Input Current See Model Selection Guide
· Single, Dual & Triple Outputs Inrush Current 115 VAC 15.0
A Pk
230 VAC 30.0
· Meets EN55022 B EMI Meets CISPR Pub. 22/FCC Class B
· >250 kHour MTBF 115 VAC 0.1
Safety Ground Leakage Current mA
Chassis Mount & 230 VAC 0.3
DIN Rail Mount Output
Models Available! Parameter Conditions Min. Typ. Max. Units
Output Voltage See Model Selection Guide
Output Current See Model Selection Guide
Output Voltage Accuracy ±1.0 ±2.0 %
Line Regulation VIN = Min to Max ±0.5 ±1.0 %
Load Regulation, Single Output IO = Min to Max ±0.5 ±1.0 %
Load Regulation, Dual, Triple Aux Output IO = Min to Max ±2.5 ±5.0 %
5.0 VDC Output 1.5 1.8
Ripple & Noise (20 MHz) %VP-P of VO
All Other Outputs 0.8 1.0
Hold-Up Time 115 VAC, 60 Hz 20 mSec
Temperature Coefficient ±0.02 %/°C
Over Voltage Protection Zener Diode Clamp 120 % of VO
Short Circuit Protection, Note 3 Continuous (Autorecovery)
Overload Protection, Note 4 Typ. 120% to 180% of Output Power
General
Parameter Conditions Min. Typ. Max. Units
Isolation Voltage Input to Output 3,000 VAC
Isolation Test Voltage Input to Output, Flash Tested For 60S 4,700 VAC
Isolation Resistance 500 VDC 500 M
EMI/RFI Conducted EN 55022 Level B
Electrostatic Discharge (ESD) IEC/EN 61000-4-2 Level 3
RF Field Susceptibility IEC/EN61000-4-3
MicroPower Direct EMC Compliance
Electrical Fast Transients/Bursts On Mains IEC/EN 61000-4-4 Level 3 2 kV
292 Page Street Surge IEC/EN 61000-4-5 Level 3 1kV/2 kV
Suite D
Switching Frequency 100 kHz
Stoughton, MA 02072
USA Environmental
Parameter Conditions Min. Typ. Max. Units
T: (781) 344-8226 Operating Temperature Range Ambient-25 +25 +71 °C
F: (781) 344-8481 Storage Temperature Range -40 +85 °C
E: sales@micropowerdirect.com Cooling Free Air Convection (See Derating Curve)
W: www.micropowerdirect.com Humidity RH, Non-condensing 95 %
Physical
Case Size 2.91 x 2.13 x 0.76 Inches (74.0 x 54.0 x 19.3 mm)
Case Material Non-Conductive Plastic& Fiberglass (UL94-V0)
Weight 4.01 Oz (114g)
Reliability Specifications
Parameter Conditions Min. Typ. Max. Units
MTBF MIL HDBK 217F, 25°C, Gnd Benign 280 kHours
Safety Standards IEN 60950, IEC 60950
Safety Approvals IEN 60950, IEC 60950
CompuMess Elektronik GmbH · Lise-Meitner-Str. 1 · D-85716 Unterschleißheim
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de
Model Selection Guide
Input Output 1 (Vout 1) Output 2 (Vout 2) Output 3 (Vout 3)
Capacitive
Model Current (A) Current (A) Current (A) Current (A) Efficiency
Voltage Voltage Voltage Load
Number (%, Typ)
115 VAC 230 VAC (VDC) Max. Min. (VDC) Max. Min. (VDC) Max. Min. (µF, Max)
MPM-15S-05IS 0.290 0.14 5.0 3.000 0.300 3,900 75
MPM-15S-12IS 0.275 0.14 12.0 1.250 0.125 2,200 79
MPM-15S-15IS 0.275 0.14 15.0 1.000 0.100 2,200 79
MPM-15S-24IS 0.275 0.14 24.0 0.625 0.063 2,200 79
MPM-15S-48IS 0.273 0.14 48.0 0.310 0.030 1,000 79
MPM-15D-12IS 0.275 0.14 +12.0 +0.625 +0.063 -12.0 -0.625 -0.063 ±1,500 79
MPM-15D-15IS 0.275 0.14 +15.0 +0.500 +0.050 -15.0 -0.500 -0.050 ±1,500 79
MPM-15T-0512IS 0.290 0.14 5.0 2.000 +0.200 +12.0 +0.200 +0.020 -12.0 -0.200 -0.020 Note 5 74
MPM-15T-0515IS 0.284 0.14 5.0 1.80 +0.200 +15.0 +0.150 +0.015 -15.0 -0.150 -0.015 Note 5 74
Other output combinations are available
Derating Curve
Contact the factory for details at:
sales@micropowerdirect.com 1 · D-85716 Unterschleißheim
CompuMess Elektronik GmbH · Lise-Meitner-Str.
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de
Notes:
1. Load regulation is measured for an output change of 0% to
100% at nominal input line. For multiple output models, the
loads are balanced.
2. Operation at no-load will not damage these units. However,
they may not meet all specifications.
3. Output short circuit protection is provided by a "hiccup mode"
circuit. The unit recovers automatically when the fault condi-
tion is removed.
4. Output overload protection is provided by a fold back current
limiting circuit.
5. For triple output models, the maximum capacitive load for the
primary (5 VDC) output is 2,200 µF. For the auxilliary outputs
it is ±1,500 µF.
6. The MPM-15IS series includes a built-in 2A/250 VAC fuse. It is
recommended that an external 1.5A slow blow fuse also be
used on the input for protection.
Mechanical Dimensions
Pin Connections
Pin Single Dual Triple
1 AC-Neutral AC-Neutral AC-Neutral
2 AC-Line AC-Line AC-Line
3 NP NP -Vo 3
4 -Vo -Vo Common
5 NP Common +Vo 2
6 +Vo +Vo -Vo 1
7 NP NP +Vo 1
NP = No Pin
Notes:
· All dimensions are typical in inches (mm)
· Tolerance x.xx = ±0.01 (±0.25)
MicroPower Direct
www.micropowerdirect.com GmbH · Lise-Meitner-Str. 1 · D-85716 Unterschleißheim
CompuMess Elektronik
292 Page Street Ste D Stoughton, MA 02072 · Telefon (089) 32 15 01 - 0 · Telefax (089) 32 · E-Mail: sales@micropowerdirect.com
TEL: (781) 344-8226 · FAX: (781) 344-8481 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de