Hier Klicken für das PDF Dokument!!!
Report Creation Software
with
Simultaneous Measurement Function
XN-8000series
A Packaged Software of Measurement,
Analysis and Report Creation Is Coming
Easy measurement processing with
simultaneous report creation instead of summarizing the
report after completion of measurement.
CompuMess Elektronik GmbH · Lise-Meitner-Str.1 · 85716 Unterschleissheim
Tel 089-321501-0 · Fax 089-321501-11 · www.compumess.de · www.netzteile.de
XN-8000 series with Measurement Processing
Integrates Report Creation
Conventionally, acoustic and sound measurement results have been summarized as a report after
completion of measurement, analysis, comparison, and other processes.
However, these working processes were complex and time-consuming as well as
requiring significant skills of the person in charge.
"XN-8000 series" is designed as platform software, using a new concept that is
completely different from conventional practices.
Simply performing the report creation procedure allows measurement and
other processing series to be done in real time, while simultaneously confirming the completion image.
XN-8000 series shortens working time remarkably, and supports the standardization of working procedures,
thus contributing to improvements in workflow and productivity.
NOW
REPORT
MEASURE ANALYZE
COMPARE
Before MEASURE ANALYZE COMPARE REPORT
Applicable Measurement Unit
DS-2000 Series Multi-channel
Data Station
02
Easy Clear
Integration of Measurement and Report Creation Graphical Display of Relationship between Measurement Conditions
XN-8000 series integrates conventional working processes, ranging from For sensor calibration, hardware setting, analysis function, etc., XN-8000 series
measurement with dedicated instruments to secondary data processing and displays various functions as icons in related manner. Measurement conditions
report creation, into a single platform. XN-8000 series starts measurement in the become clear by visual check, and multiple items can be set and changed
report creation screen and then displays measurement results in real time as a speedily. XN-8000 series saves the time of looking for target condition settings
completion image. During repetitive measurement, for example, it saves the and items from many property settings.
trouble of creating reports one by one, significantly reducing working time.
Hardware channel palette
Displays relationship between
channels and conditions.
Various Convenient
Intuitive Overlay and Comparison Operations of Measured Waveforms Semi- or Full-Automatic Measurement for Routine Procedures
In the past, graphs printed on sheets were overlapped or graphs were displayed XN-8000 series offers the task function to perform repetitive measurement efficiently
on a personal computer in overlay mode in order to compare and analyze when, for example, the working procedure is predetermined. The function makes it
measurement waveforms. XN-8000 series makes it possible to overlay graphs possible to perform semi- or full-automatic measurement easily and intuitively only by
with a suitable measurement scale simply by dragging a graph object onto registering measurement conditions and report screens in advance and by arranging
another one. icons using the mouse according to the working procedure.
Data overlay for comparison
Task editing
*Model XN-0860 Task editing function software is required in order to perform semi or full-automatic
measurement by creating and correcting measurement procedure (task).
This software is not required if it is only executed a created task.
dIncorporates measurement, analysis, comparison, and other processes in
"Report Creation", remarkably increasing working efficiency and reducing working time.
dReflects measurement data to graphs and charts in a report in real time,
allowing measurement and output while confirming the completion image of the report.
dNo specialist skills are required for report creation and measurement work.
Promotes standardization of tasks and improvements in workflow.
03
XN-8000 series
A New Tool of Measurement Report
Requiring No Specialist Skills for Report Creation and Measurement Work
Model XN-8100 is a platform of XN-8000 series with a new concept that works completely differently from
conventional practices of acoustic and vibration measurement. It controls all work processes from the completion
image at report creation, and supports work procedure development by means of a task function.
Report Layout Creation through Measurement Setup Procedure with
1 Object Arrangement 2 Configuration Board
Creation of report layout is easy. Target objects (graphs, texts, Using the Configuration Board and Channel Pallet, arduous
images, etc.) can be put on the report page simply by clicking calibration, measurement, and analysis setting can be
icons in the tool bar and then specifying the desired layout performed in graphical form. The channel selected with the
size by dragging the mouse. Layout settings can be changed Channel Pallet and the analysis function assigned to the
at any time. channel are displayed in tree form. Multi-application and multi-
frequency range setting can be made while confirming the tree-
form display.
j Applicable to Diverse Data Analysis j Multi-Frequency Range Setting
dMulti-application (simultaneous multiple analyses The multi-frequency range function allows multiple frequency
and recordings) ranges to be set for the input signal of each channel, enabling
dMulti-frequency range simultaneous real-time analysis.
· FFT frequency analysis
· Frequency response analysis j Smooth Measurement and Analysis Setting
· Real-time octave analysis A wide range of condition settings are provided to perform averaging,
trigger setting, scheduling, and other measurement and analysis functions.
· Constant-width tracking analysis
· Constant-ratio tracking analysis
j Automatic Display of
· Octave tracking analysis Connected Channels
· Phase tracking analysis The Channel Pallet, a part of the
Configuration Board functions, makes it
easier to manage connected instruments.
j Labor-saving of Recalibration Work
Arduous calibration work has become a
j Sharing of Report simple selection step.
If recorded data files (ORF format) are specified for the project file, This operation
waveforms can be played back in motion. remains easy even
The model XN-8100's viewer (free of charge) makes it possible to when using a calibrator.
view created project files and read cursor values.
* Please note, however, that analysis condition change, hardware connection, print function,
and file storage are not possible. For details on the Configuration Board, see pages 6 and 7. PP
04
Measurement Started Report Completed upon Completion
3 from Remote-Controlled Pallet 4 of Measurement
j Report Completed upon Completion of Measurement
Real-time analysis of front-end signal Model XN-8100 completes a report upon completion of
measurement. The report can be printed in original form.
j Arbitrary Offline Analysis with Project File
Playback analysis with recorded data Analysis types and conditions can be changed and diverse
offline analyses can be realized simply by opening a project file
Data recording
and specifying recorded data using the Remote-Controlled Pallet.
j Level Monitor j Comparison of Measurement Results
Displays the input level of the signal-input Intuitive Overlay and Comparison Operations of Measured Waveforms
channel in the form of bar graph. Peak level Overlaid display with unified measurement scale is possible simply
display, input-over display, and voltage by dragging one graph signal onto another one. In addition to
range change are possible. overlaying measured data and past data, measured data can be
The input-over information is retained. overlaid to image
data, even if
j Status Monitor only hardcopy
Displays the time status (elapsed time is available.
and remaining time of analysis),
averaging status (number of averagings j Multi-Marker
per analysis), scheduling status (number Multiple markers can be registered as search
of points, revolution speed, slope), point markers. The multi-marker function is also
recording status (elapsed time and applicable to delta search.
remaining time of recording, record
number), and revolution speed. j Support for Diverse Graph Types
Sequential line graph, bar graph, step graph, half bar graph, line
graph, array (sequential line graph), array (bar graph), array (step
graph), contour map, and color map are supported.
j Waveform Monitor
Constantly monitors the input signal based on the maximum
analysis frequency range (sampling frequency). Useful for input
A/D-over monitoring. Also allows
trigger setting while monitoring j Axis Setting with Cursor Mode
instantaneous waveform. Graph upper and lower limit settings,
and parallel displacement of axis, can
be modified with mouse drag operation.
05
XN-8000 series
Configuration Board
Graphic Dialogs and a New Format of Measurement Report
The Configuration Board displays analysis conditions (averaging, trigger setting, scheduling, etc.) and analysis
functions (FFT, tracking, octave, etc.) as icons, and visualizes their association in tree form.
It not only clarifies the relationship between the channel and measurement conditions through visual confirmation, but
also allows speedy setup and change of multiple items, eliminating the need to search for setup properties each time.
A single channel or multiple ones (group) can be selected from the Channel Pallet and then analysis conditions and
analysis functions can be assigned to each channel. This realizes easily multi-application and multi-frequency range
for performing different types of analysis simultaneously.
q w
e r t
y
q
j Multi-Frequency Range
Configuration Board Multiple frequency ranges can be set for the input signal of each
channel, allowing simultaneous real-time analysis. It is possible to
All functions required for analysis (calibration, hardware settings,
realize such analysis that uses multiple FFT analyzers using only one
analysis functions, and analysis conditions) can be set with the
signal. This function broadens the frequency range for total analysis
graphical user interface.
while at the same time setting a frequency range that suits the target
j Analysis Configuration Display in Tree Form frequency, enabling simultaneous real-time analysis.
Available analysis functions are displayed. XN-8000 series uses the
measurement platform (XN-8100) in combination with optional
analysis functions. Available optional analysis functions include the
FFT analysis function (XN-0821), order ratio analysis function (XN-0822),
w Channel Pallet
octave analysis function (XN-0823), etc. The record function is The Channel Pallet displays the connected front-end channels. It
included in each analysis function, allowing data recording allows input signal selection on a channel basis as well as
simultaneously with various analyses. grouping of multiple channels for selection on a group basis. The
Channel Pallet, a part of Configuration Board functions, is used
j Setting with Mouse Drag Operation together with the Configuration Board.
Set analysis functions are displayed in list form. An analysis function is
connected to a channel by dragging the icon of the analysis function j Group Setting
onto the target channel in the connection area. Multiple analysis Grouping is possible, based on sensor and analysis types. Channels
functions can be assigned to a single channel. In addition, the same can be selected collectively by pressing a set group color button.
single analysis function can be connected to multiple channels.
Analysis functions are set in a setup screen that is displayed by j DS-2000 Unit Information Display as Icon
clicking the icon in the connection area or registration list. The voltage range can also be changed with the Channel Pallet. At
j Simultaneously possible Multi-Application and Recording input signal over, a warning is displayed (as shown at
right). The channel name can be changed freely, for
Constant-ratio tracking analysis and constant-width tracking analysis, for
example, from "CH.1" to "Impulse hammer."
example, can be processed simultaneously in real time. In addition, various
analysis functions and RECORDing can be executed simultaneously.
06
e Sensor Database y Analysis Functions
Calibration is completed simply by selecting the sensor type, j Averaging Simultaneous measurement of Ave, Max, and Min is
manufacturer name, model name, and serial number sequentially. possible with spectrum summation averaging,. Display
These data can be loaded from the sensor database (sensor list) changeover can be made after measurement.
by selecting the sensor to be used. This database makes it j Trigger Setting Voltage-based trigger setting is possible. Even if the voltage
possible to accumulate the information of the sensor to be used, range is changed, trigger can be applied with specified conditions.
saving labor for recalibration at the time of sensor replacement. The new Hold-off function broadens the range of trigger settings.
Sensors not included in the database and sensors calibrated with j Scheduling With revolution scheduling, up to 65,535 store points can be
the reference signal can additionally be registered to the database. used. Applicable slope settings include Up, Down, Up-Down,
and Down-Up. The function to wait until the revolution speed
becomes out of range has been added, allowing measurement
to be started irrespectively of the revolution speed status.
Example of sensor list display
Example of calibration with reference signal
j External Amplifier
Saves labor in recalibration performed by changing the range of the
sound level meter and the gain of the external amplifier.
j 0-dB Reference
EU is effective even during time-axis display and linear display. Offline Analysis with XN-0850
The XN-0850 record data editing function makes it possible
r Digital Filters
to perform offline analysis and playback analysis for
specified analysis range while monitoring the recorded data
(ORF/WAV format).
Digital filters can be set for each channel. Available filters include
low-pass filter, high-pass filter, band-pass filter, and band-reject
filter. The cut-off frequency can be set in 1-Hz units.
t Analysis Functions
A Settings List
The data length, time length, and sampling interval can be confirmed.
B Window Function Display
When setting the FFT and order ratio analysis functions, the monitor
j Spectrum Monitor
Displays the spectrum of the I frame at the cursor position in the waveform
waveform can be displayed with weighting of the window function.
viewer. Effective for analysis function setting.
C Collective and Individual Settings j Viewer Function
The window function can be set either collectively for multiple
The analysis range can be set and zoomed with simple mouse drag
channels or individually for each channel. function, allowing efficient analysis range setting.
j Analysis with Sound Generation
A Offline analysis and playback analysis can be performed while playing
back and listening to the recorded data (ORF/WAV format). Useful for
making it easier to grasp phenomena.
C j Range List Function
B Multiple analysis ranges can be registered, making repetitive analysis and
data comparison easier. Data within specified analysis range can also be
exported.
j Time-Axis Statistical Processing
Time-axis statistical processing of specified analysis range is possible,
exceeding the conventional 1-frame restriction.
Example of base band FFT setting
07
XN-8000series
Model Product Name Overview
Main body of XN-8000 series. When analysis functions such as XN-0821 are added to the
Measurement platform
XN-8100 (report function)
XN-8100, this enables hardware and analysis condition setting, multi-application and multi-
frequency range analysis, etc.
XN-0820 Tachometer function Converts pulse signal into revolution. Used together with the XN-0821,XN-0822 and XN-0823.
FFT analysis zooming the signal are enabled in combination with XN-8100. Real-time analysis
XN-0821 FFT analysis function in multi-frequency range is enabled by setting the frequency range and other multiple analysis
conditions. Constant-width tracking is enabled in combination with the XN-0820.
Order ratio analysis Rpm order ratio analysis (constant-ratio tracking) is enabled in combination with the
XN-0822 function XN-8100 and XN-0820.
1/1 or 1-/3 octave band analysis is enabled in combination with the XN-8100.
XN-0823 Octave analysis function
Octave tracking is also enabled by adding the XN-0820.
Used to edit measurement data to perform repetitive analysis (off-line analysis) efficiently.
Data recording and Enables spectrum monitoring, time-axis statistical processing, sound board output, file
XN-0850 editing functions export to WAV format, etc. as well as total display and analysis range specification of
recorded data in combination with the XN-8100.
Semi- or full-automatic measurement is enabled by creating and correcting measurement
XN-0860 Task editing function
procedures (tasks). The XN-0860 is not required to execute a created task.
Data file (ORF/WAV format) can be output (replayed) from sound card by synchronizing
Data file
XN-0870 replaying function the start of the analysis at XN-8100.
WAVE format of randam/sain waveform can be created.
Allows you to view a project file created by XN-8000 series and read the cursor value.
If recorded data files (ORF format) are specified for the project file, waveforms can be
XN-8000 series viewer
played back allowing the use as a moving report. However, analysis condition setting,
hardware connection, printing, and file saving cannot be performed.
XN-8000 series Combinations
XN-8100 XN-0820 XN-0821 XN-0822 XN-0823 XN-0850
FFT analysis with XN-8000 series
FFT and tracking analysis with XN-8000 series
FFT and octave analysis with XN-8000 series
Applicable Measurement Unit
Model Product Name Overview
Signal processing unit for sound and vibration measurement. When used together with the
DS-2000 Series Multi-channel Data Station
2- or 4-channel unit, the number of channels can be extended to 32.
Recommended operating environment OS Windows® XP, Windows® 2000
(including DS-2000) Connection with DS-2000 Desktop PC: PCI BUS, Notebook PC: PC card (CardBus)
*Refer to the catalog of the DS-2000 Series Data Station for details.
CPU Pentium® 4 3GHz or higher (or compatibles)
Display 1024u768(XGA) or higher
Memory 512MB or more
Hard disk 500MB or more
*Windows® is a registered trademark of Microsoft Corporation of the U.S.A. and other countries. Other company names and product names are
trademarks or registered trademarks of each individual company.
URL:http://www.onosokki.co.jp/English/english.htm
U.S.A & CANADA P.R.CHINA WORLDWIDE
Ono Sokki Technology Inc. Ono Sokki Beijing Office Ono Sokki Co., Ltd.
CompuMess Elektronik GmbH · Lise-Meitner-Str.1 · 85716 Unterschleissheim
2171 Executive, Drive, Suite 400
Addison, IL. 60101 U.S.A
1-16-1 Hakusan, Midori-ku,
Beijing Jing Guang Center 3510
Hu Jia Lou, Chao Yang Qu
Yokohama 226-8507, Japan
Tel 089-321501-0 · Fax
Phone : 630-627-9700 089-321501-11 · www.compumess.de
Beijing P.R.C. 100020 · www.netzteile.de
Phone : 045-935-3976
Fax : 630-627-0004 Phone : 010-6597-3113 Fax : 045-930-1906
URL : http://www.onosokki.net Fax : 010-6597-3114 E-mail : overseas@onosokki.co.jp
E-mail : info@onosokki.net E-mail : onosokki@public.bta.net.ch
Recycled paper