Hier Klicken für das PDF Dokument!!!
XPL Series
30 to 125W Laboratory DC Power Supply
XPL 56-1 XPL 30-2T
Single Output Triple Output
High Performance Low Cost Bench DC Power Supply Xantrex Technology Inc.
Headquarters
The Xantrex XPL series has been designed to meet the need for compact power supply at a reasonable 8999 Nelson Way
price. The XPL series provides 30 to 125 watts of programmable linear DC power. The XPL is a compact, Burnaby, British Columbia
high performance low cost power supply suited for benchtop applications. Canada V5A 4B5
604 422 8595 Phone
The XPL Series uses linear regulation for high performance. The XPL Series features excellent line and 800 667 8422 Sales & Support
load regulation with low noise and good transient response. The XPL Series is available in a single, dual 604 421 3056 Fax
and triple output for benchtop use. prg.info@xantrex.com
The XPL dual output model has two independent and isolated outputs each with a 0 to 30V, 0 to 2A 5916 195th Street NE
capability and its own on-off switch. The outputs can be wired in either series or parallel to provide Arlington, Washington
voltages up to 60 volts or currents up to 4 amps. All outputs are instrinsically short circuit proof, and USA 98223
are protected against external voltages and reverse currents. The XPL triple output model has the same 360 435 8826 Phone
features as the dual output model with an additional switchable fixed output of 3.3V and 5V. 360 925 5144 Fax
Product Features Edificio Diagonal 2A,
Low noise C/ Constitución 3, 4º2ª
Excellent line/load regulation 08960 Sant Just Desvern
Coarse and fine voltage controls Barcelona, Spain
Constant voltage or constant current operation with automatic crossover and mode indication General Tel: +34 93.470.5330
Individual on/off switch per output (not including fixed output) General Fax: +34 93.473.6093
Switchable 3.3V/5V output on triple output model
CompuMess Elektronik GmbH · Lise-Meitner-Str. 1 · D-85716 Unterschleißheim
Telefon (089) 32 15 01 - 0 · Telefax (089) 32 15 01 - 11
info@compumess.de · www.compumess.de · www.netzteile.de
© 2004 Xantrex Technology Inc. All rights reserved. Xantrex is a registered trademark of Xantrex International. DS20040609R04_xpl. Printed in Canada www.xantrex.com
XPL Series
30 to 125W Laboratory DC Power Supply
Electrical Specifications
Models 18-3 30-1 30-2 30-2D 30-2T 56-1
Output Ratings:
Output Voltage 0-18 V 0-30 V 0-30 V 0-30 V 0-30 V 0-56 V
Output Current 0-3.3 A 0-1 A 0-2 A 0-2 A 0-2 A 0-1.1 A
Outputs 1 1 1 2 3 1
Output Power 60 W 30 W 60 W 120 W 125 W 60 W
Operating Mode Constant voltage or constant current with automatic cross-over and indication
Voltage Setting By coarse and fine controls
Current Setting By single logarithmic control
Line Regulation < 0.01% of max. output for a 10% line voltage change
Load Regulation <0.01% of max. output for a 90% load change
Output Impedance Typically <5m in constant voltge mode. Typically > 50k in constant current mode
Ripple and Noise (20 MHz) Typically <1mV rms (CV mode)
Transient Response <20µs to within 50mV of set level for 90% load change
Temperature Coefficient Typically <100ppm/°C
Output Protection Outputs will withstand forward voltages of up to 20V above the rated output voltage.
Reverse protection by diode clamp for current up to 3 A
Status Indication Output ON lamps. Constant current mode lamps
Output Switch Electronic. Preset voltage and current displayed when output is off
Output Terminals 4mm terminals on 19mm (0.75') pitch
Meter Resolutions 100 mV, 10 mA
Meter Accuracy:
Voltage 0.3% ±1 digit
Current 0.6% ±1 digit
Logic Output (XPL 30-2T)
Voltage 5V or 3.3V, selectable by front panel switch
Voltage Accuracy ±3%
Current Limit 1A minimum
Load Regulation